Filter
Top Products
YML781 Rev1 NB1 Quick Start Guide
www.netcomm.com.au 11
Connecting your NB1
The NB1 is connected via an Ethernet cable.
To connect to your NB1, you will need to have an available Ethernet Port present on your
Computer/Notebook or on your network hub or switch.
1. Connect your NB1 to either a computer directly or a network hub or switch using
a CAT5 ethernet cable.
2. Connect the power pack to the ADSL Modem and switch on the power switch.
3. Ensure that there is a ETHERNET link light on the NB1.
4. Ensure that the computer you intend to use has an IP address in the same sub-
net as the NB1 ADSL Modem. (e.g. the NB1’s default IP is 192.168.1.1 - your
computer should be on 192.168.1.100 or similar.) If you have DHCP enabled on
your computer, the NB1 will assign your computer a suitable IP address.
5. Ensure that your computer has a LAN link light.
6. Connect one end of the ADSL phone line to the NB1 ADSL port and the other
end to the ADSL-enabled line wall socket.