Filter
Top Products
YML781 Rev1 NB1 Quick Start Guide
www.netcomm.com.au 9
Restoring Factory Defaults
This feature will reset the Modem to its factory default configuration. Occasions may
present themselves where you need to restore the factory defaults on your modem.
Typical situations are:
• You have lost your username and password and are unable to login to the mo-
dem.
• You have purchased the modem from someone else and need to reconfigure the
device to work with your ISP.
• You are asked to perform a factory reset by a member of the NetComm Support
staff.
In order to restore your modem to its factory default settings, please follow these
steps:
• Ensure that your Modem is powered on (for at least 10 seconds).
• Use a paper clip or a pencil tip to depress the reset button for ten seconds and
release. At this point, the reset is in progress. Do not power off the unit at this
point.
• When indicator lights return to steady green, reset is complete. The default set-
tings are now restored. The entire process takes about 45 seconds to complete.
• Once you have reset the modem to its default settings you will be able to access
the device's configuration web interface using http://192.168.1.1 with username
'admin' and password 'admin'.