Filter
Top Products
YML854 Rev1 NB6, NB6W, NB6Plus4, NB6Plus4W, NB6Plus4WnNB6, NB6W, NB6Plus4, NB6Plus4W, NB6Plus4Wn User Guide
www.netcomm.com.au 79
IP Routing – Static Route
The table shows all static route status and allows you to add new static IP route or delete static route. A Static
IP Routing is a manually defined path, which determines the data transmitting route. If your local network is
composed of multiple subnets, you may want to specify a routing path to the routing table.
Destination Network Address:
Display the IP address that the data packets are to be sent.
Netmask, Gateway, WAN Interface:
Display the subnet mask, gateway, and WAN interface information that the transmitting data will
pass through.
Delete:
Allow you to remove the static route settings.
This page shows all the routing table of data packets going through your ADSL Router.
Adding a New One
To add a static route, please click Add. Type the destination network address, subnet mask and
gateway that you received from the ISP and click Apply.
IP Address:
The destination IP address of the network indicates where data packets are to be sent. You may
specify an IP, type 0.0.0.0, or leave it blank.
Netmask:
Enter the subnet mask that you got from the ISP, type 0.0.0.0 or leave it blank.
Gateway IP Address:
Click this button to forward packets to the specific gateway. Key in the gateway IP address that you
want to use.
WAN Interface:
Click this button to forward packets to a specific WAN interface. Choose one from the drop-down menu.
E.g., type 192.168.1.1 in the field of the gateway IP address and leave the destination network blank.
Click Apply to view the routing result.