Filter
Top Products
10 NS370 / NS370W User Guide
YML814 Rev1
Hardware Installation
Connecting the Ethernet cable
Connect an Ethernet cable to the network cable
connector located on the Internet Camera’s rear
panel, and then attach it to the network.
Attaching the Power Supply
Attach the external power supply to the DC power
input connector located on Internet Camera’s rear
panel, and then connect it to your local power
supply.
Attaching the Camera to the Stand
The Internet Camera comes with a camera stand
(optional) with a swivel ball screw head that can be
attached to the Internet Camera’s bottom screw hole.
Attach the camera stand to the Internet Camera and
station it for your application. There are three holes
located in the base of the camera stand allowing the
Internet Camera to be mounted on the ceiling or any
wall securely.
TIP: You can confirm power source is supplied from the LED indicators
label Power on the Internet Camera is illuminated.