Filter
Top Products
NS370 / NS370W User Guide 19
YML814 Rev1
System Administration > Configuration
The Configuration window contains commands for settings that are required to input key details
to setup the camera for operation. Click Configuration in the top menu bar and the Configuration
window will appear as below:
System
Click the System item in the left column to setup the basic configuration of your camera.
System Setting
In this field, you can configure the basic information of your camera.
• Camera Name: This field is used to enter a descriptive name for the device. The default
setting for the Camera Name is CS-xxxxxx, where xxxxxx is the last six digit of the
MAC Address. The maximum length is 32 (printable ASCII).
• Location: This field is used to enter a descriptive name for the location used by the
camera (optional).
• Admin: This field is used to enter the administrator name along with the password
to access the System Administration settings. Be sure to enter the password twice
to confirm the details once in the Admin Password field and again in the Confirm
Password field.