Filter
Top Products
The console port is configured to use the following settings:
• Baud rate: 9,600 bps
• Data bits: 8
• Parity: none
• Stop bit: 1
• Flow control: none
These settings appear below the connector on the switch front panel.
In addition to using the console port, you can manage the switch using a Web browser or a Simple Network
Management Protocol (SNMP) management program.
For more information about console-port connections, see “Connecting to the Console Port” in Chapter 3
Installation. For more information about managing the switch, see the User Manual located on the CD-
ROM.
Page 12 of 24