Filter
Top Products
CHAPTER 1: INTRODUCTION
Congratulations on your purchase of a NETGEAR Model FSM7352S Layer 3 Managed Stackable Fast
Ethernet Switch! Your NETGEAR Switch is a state-of-the-art, high-performance, IEEE-compliant network
solution designed for users who want ease of use along with powerful management features you can use
to eliminate bottlenecks, boost performance, and increase productivity.
This Installation Guide will assist you in getting your switch up and running. For a detailed description of
the management features in this switch, refer to the User Manual, located on your Resource CD for Layer 3
Managed Switches that came with your switch.
This chapter serves as the introduction for using your NETGEAR FSM7352S Switch and provides the
following information:
Overview
Switch Features
Package contents
Overview
Your NETGEAR Model FSM7352S Layer 3 Managed Stackable Fast Ethernet Switch provides the benefit
of management with a complete package of features for the observation, configuration, and control of your
network. With a web-based Graphical User Interface (GUI), the switch’s many capabilities can be viewed
and used in a simple and intuitive manner. For those who prefer a more traditional interface, there is
Command Line Interface (CLI) available through the console port on the front or a telnet connection via the
network. The switch’s management features include SNMP and RMON for port and switch information,
VLAN for traffic control, port trunking for increased bandwidth, and Class of Service (CoS) for traffic
prioritization. These features and more will allow you to better understand and better control your network.
Your NETGEAR Model FSM7352S Layer 3 Managed Stackable Fast Ethernet Switch also provides four
fiber Gigabit Ethernet ports using miniGBIC fiber connector located on the front panel. The SFP module
bays will accept any standard SFP module. Using these Gigabit ports, you can create high-speed
connections to a server or network backbone. For example, you can connect:
• Switches to each other with high-speed links
• High-speed servers
•
Fiber and copper Gigabit Ethernet networks
Your NETGEAR Model FSM7352S Layer 3 Managed Stackable Fast Ethernet Switch can be free-standing,
or rack mounted in a wiring closet or equipment room. It is IEEE-compliant and offers low latency for high-
speed networking. It includes 48 10/100 ports and 4 auto-sensing 10/100/1000 ports. The ports are
shielded RJ-45 ports that automatically negotiate to the highest speed. In addition, all 10/100/1000 Mbps
ports operate in half- or full-duplex mode, increasing the maximum bandwidth of each connection up to 20
Mbps or 200 Mbps or 2000Mbps, respectively. Using Auto Uplink™ technology, every RJ-45 port will
automatically detect the proper MDI or MDI-X configuration to make the connection, eliminating the need
for crossover cables. The maximum segment length is 328 feet (100 meters) over Category 5 unshielded
twisted-pair (UTP) cable.
Page 5 of 24