Filter
Top Products
NETGEAR ProSafe SSL VPN Concentrator 25 SSL312 Reference Manual
Configuring the SSL VPN Tunnel Client and Port Forwarding 6-3
v1.1, November 2006
Adding IP Address Ranges
Determine the address range you will assign to VPN Tunnel Clients, then define the address range
in the SSL VPN Concentrator administrative interface.
To configure the SSL VPN Tunnel client address range:
1. Under Access Administration in the left navigation pane, click the VPN Tunnel option. The
VPN Tunnel Client screen displays.
In the Client IP Address Range section of the screen, you can define the IP address range to
assign to incoming VPN Tunnel clients. The default range begins with 192.168.251.1 and
ends with 192.168.251.254.
2. In the Client Address Range Begin field, enter the first IP address of the IP address range.
3. In the Client Address Range End field, enter the last IP address of the IP address range.
4. Click Apply to update the configuration.
5. Restart the SSL VPN Concentrator software if any VPN Tunnel Clients are actively
connected. Restarting will force the clients to obtain a new virtual IP address.
VPN Tunnel Clients are now able to connect to the SSL VPN Concentrator and receive a
dynamic IP address in the client address range.
Be sure to configure DNS addresses in the Network menu.