Filter
Top Products
NETGEAR ProSafe SSL VPN Concentrator 25 SSL312 Reference Manual
Configuring the SSL VPN Tunnel Client and Port Forwarding 6-5
v1.1, November 2006
3. Click Add Route. The client route appears in the Configured Client Routes table, as shown in
the figure below.
4. Restart the SSL VPN Concentrator software if VPN Tunnel Clients are currently connected to
the SSL VPN Concentrator. Restarting forces clients to reconnect and receive new addresses
and routes.
Now users are able to connect to the SSL VPN Concentrator and receive a virtual IP address
from the client address range.
.
To delete a VPN Tunnel Client Route:
1. In the Configured Client Routes table, click the Delete link adjacent to the client route.
Note: You must also add a static route on your corporate firewall or router that directs
local traffic destined for the VPN Tunnel Client address range to the SSL VPN
Concentrator.
Figure 6-2