NETGEAR WPN824 Network Router User Manual


 
Reference Manual for the RangeMax Wireless Router WPN824
Maintenance 6-7
202-10072-01, March 2005
Erasing the Configuration
It is sometimes desirable to restore the router to original default settings. This can be done by using
the Erase function, which will restore all factory settings. After an erase, the router’s username will
be admin, the password will be password, the LAN IP address will be 192.168.1.1, and the
router's DHCP server will be enabled.
To erase the configuration, click the Erase button.
To restore the factory default configuration settings without knowing the login password or IP
address, you must use the Default Reset button on the rear panel of the router. See “Restoring the
Default Configuration and Password” on page 7-7.
Upgrading the Router Software
Tip: To ensure you are always using the latest firmware, enable the Firmware Upgrade Assistant
feature so that the router will automatically detect a new version of the firmware on the Internet
and alert you to its availability.
This screen appears at login unless you check Do Not Display This Message Again and click Yes.
Figure 6-6: Firmware Upgrade Assistant menu
Note: Before upgrading the router software, use the router backup utility to save your
configuration settings. Any router upgrade will revert the router settings back to the
factory defaults. After completing the upgrade, you can restore your settings from the
backup.