Filter
Top Products
ReadyNAS NVX Business Edition User Manual
2-28 Setting Up and Managing Your ReadyNAS NVX
v1.1, February 2009
Settings
This ReadyNAS NVX Business Edition device has been preconfigured with mandatory and
optional alerts for various system device warnings and failures. The Settings tab allows you to
control the settings for the optional alerts.
You should keep all alerts enabled; however, you might choose to disable an alert if you are aware
of a problem and wish to temporarily disable it.
At the bottom of the screen in the Other Alert Settings section, there are a couple of additional
options of note. Selecting the Power-off NAS when a disk fails or no longer responds option
gracefully powers off the ReadyNAS NVX Business Edition if a disk failure or a disk remove
event is detected. Selecting the Power-off NAS when disk temperature exceeds safe level
gracefully powers off the ReadyNAS NVX Business Edition when the disk temperature exceeds
the nominal range.
SNMP
If you utilize an SNMP management system such as HP OpenView or CA UniCenter to monitor
devices on your network, you can set up the ReadyNAS NVX Business Edition device to work
within this infrastructure.
To set up SNMP service:
Figure 2-33
Figure 2-34