Filter
Top Products
User’s Guide for the WAB102 802.11a+b Dual Band Wireless Access Point
Protecting Your Wireless Network
37
Change the SSID
Follow the steps below:
1. From the Windows desktop, follow the instructions given in “Basic
Configuration“ on page 14 to go to the Setup window.
2. To change the SSID, enter a new SSID.
Note: The characters are case sensitive. An access point always functions in
infrastructure mode. The SSID for any wireless device communicating with
the access point must match the SSID configured in the access point.
3. Click Apply or OK for the changes to take effect.