Filter
Top Products
Restore Factory Default Settings
You may click on the Restore Factory Default Settings button to revert to default factory settings.
Station List
The Station List window displays the assigned ID, MAC address, device name, and the
current state of the clients that are currently connected to the access point.
Reset Access Point
You can reset the Access Point by selecting this management option.
Advanced Options
Wireless Settings
To setup your advanced wireless LAN settings, complete the following:
1. Choose the Wireless Settings option from the Access Point Advances menu on the
WG602 Web Server home page.
2. Specify your wireless configuration settings. When you are done, click Apply for the
changes to take effect.
Note: Be sure to make the same configuration changes on the other wireless adapters in
your network.
Upgrade Firmware
The Firmware Upgrade menu options will display the Firmware Upgrade window so that you
may upgrade your latest WG602 firmware.
Before upgrading the WG602 firmware, make sure you have downloaded the latest firmware
from the NETGEAR support web site: http://www.netgear.com/support.
1. Enter the location of the WG602 firmware file name or click the Browse button to locate
the file on your local disk.
2. When you are done, click the Upgrade button and then the Reboot button for the
changes to take effect.
You may click the Upgrade button to perform the upgrade operation.
16
15
Configuration Description
File Name Specifies the WG602 firmware image file.
Browse
You may click on the Browse button to locate and select the
firmware image file residing on the system that's used for
configuring the access point.