Filter
Top Products
Wireless-N 300 USB Adapter WNA3100 User Manual
1-5
v1.0, December 2009
3. Click Next. The WNA3100 v1 software detects the adapter. Follow the onscreen prompts to
install the driver.
4. Follow the prompts to complete the installation.
How you connect to a network depends on what you selected during custom installation.
• For automatic configuration, see the following section, “Use Smart Wizard Automatic
Configuration to Connect to a Wireless Network.”
• If you selected manual configuration, the Settings tab displays. See “Joining a Network”
on page 2-2.
• To use a Windows utility, see your Windows documentation or the NETGEAR application
note at http://documentation.netgear.com/reference/enu/winzerocfg/index.htm.
Use Smart Wizard Automatic Configuration to Connect to a
Wireless Network
After the driver is installed, you are prompted to connect to a wireless network.
1. One of the following screens displays:
• If no WPS networks are in your area, select your wireless network from the list and click
Next. If you select a secured network, you need to enter the passphrase or network key.
Figure 1-5
No WPS-capable networks in your area WPS-capable networks in your area