Filter
Top Products
Installation Guide for Customer Self Install, Windows 9x/ME/NT/2000/Mac Page 2
2002 MegaPath Networks Inc. All rights reserved.
Table of Contents
Follow Steps 1 through 5 to complete the DSL Equipment Installation
Step 1: Verify Your System Requirements and Documents 3
Step 2: Verify the Contents of Your DSL Equipment Kit 4
Step 3: Install a Telephone Filter on Every Telephone Line 5
Step 4: Install the Netopia® DSL Router 7
Step 5: Configure Your Computer
Windows
95 and 98 Dynamic Configuration 8
Windows
95 and 98 Static Configuration 11
Windows
2000 Dynamic Configuration 15
Windows
2000 Static Configuration 17
Windows
NT Dynamic Configuration 19
Installing TCP/IP for Windows 22
Macintosh DHCP Configuration 26
Macintosh Static Configuration 29
Customer Support:
1-877-611-6342
IMPORTANT NOTE: This guide portrays the typical steps for the installation process. Please
follow the instructions. Some computer or network configurations may cause software windows
to appear that are not depicted in this guide. Please read and follow the instructions on those
screens to continue the installation process. Verify that you are installing your DSL equipment
AFTER the “Phone Company Commit Date” given to you when you ordered your DSL Internet
Service. MegaPath Networks Inc. and its affiliates have no responsibility for any personal injury
or property damage which may result from your installation of DSL Equipment as discussed in
this guide. MegaPath Networks and its affiliates specifically disclaim any liability for such injury or
damage. By proceeding with this installation, you assume all risk of personal injury or property
damage. Please consult the documentation provided by your PC vendor to identify any impact on
your warranty.