Filter
Top Products
Installation Guide for Customer Self Install, Windows 9x/ME/NT/2000/Mac Page 6
2002 MegaPath Networks Inc. All rights reserved.
c. DSL Router and Analog Device on the Same Jack
1.
1. Connect the filter to
your phone jack.
2. A filter is required
between all phones,
answering machines,
fax machines, Caller ID
units or analog routers
and the phone jack for
the DSL line.
3. Connect the phone
line connecter to your
router to the side of
the filter labeled “ADSL
HPN”.
2.
3.
d. DSL Router Running Directly from the Wall Jack with No Shared Devices
1. Connect the router to
your phone jack.
2. No filter is required if
the Netopia does not
share the line with an
analog device.
1.
2.
e. A NIC (Ethernet) card is required to complete this installation. If you do not have an available NIC
card, contact your computer vendor or authorized technician to arrange for installation.
NOTE: The NIC card must be properly installed before beginning the installation of the DSL kit
components.
Warnings and Cautions:
Refer to your PC manual for instructions on opening your PC to install
new hardware. Follow all safety warnings and precautions as specified
by your PC manufacturer.
In Addition:
• Back up any important files on your hard drive.
• Turn off your PC and unplug the power cord.
• Unplug all cables connecting your PC to the peripheral devices.
Note the port location of each device so you can easily reconnect
the cables later.