Filter
Top Products
Making the Physical Connections 2-3
3. Connect the Ethernet cable to the Ethernet port on the router and the other end to your computer.
You should now have: the power adapter plugged in; the Ethernet cable connected between the router and
your computer; and the DSL cable connected between the router and the DSL wall outlet.
Netopia 4541/4542 ADSL Router status lights
The figure below represents the Netopia 4541/4542 status light (LED) panel.
Netopia 4541/4542 LED front panel
The following table summarizes the meaning of the various LED states and colors:
When this happens... the LEDs...
The power is on
Power
is green.
The Router detects an error
Error
is red.
The Ethernet link is established
Ethernet
is green.
The WAN has trained
DSL
is green.
The WAN is training
DSL
flashes green.
Note:
The remaining LEDs are not used.
DSL
Power
Error
Ethernet