Filter
Top Products
Easy Setup 6-31
Quick Easy Setup Connection Path
This section may be all you need to do to configure your Netopia 4652 SDSL/IDSL Router. Your service provider
will supply you with several parameter values. Below is a handy checklist:
DSL Line Configuration Screen
Line type ❑ SDSL-ATM (default)
or
❑ SDSL-HDLC
or
❑ IDSL (requires reboot)
(for SDSL-ATM only)
Operation Mode:
❑ Generic
❑ Lucent
❑ Nokia EOC Fast
❑ Nokia Fixed
❑ Paradyne
❑ Nortel UE IMAS
Data Rate:
_______________________
Data Link Encapsulation ❑ PPP (default)
or
PPP Mode:
❑ VC Multiplexed (default) or
❑ LLC SNAP
❑ RFC1483
or
RFC1483 Mode (SDSL-ATM Line
Type only):
❑ Bridged 1483 (default) or
❑ Routed 1483
(for Bridged 1483 only)
PPP over Ethernet (PPPoE)
❑ Off (default) or
❑ On
(for SDSL-HDLC and ISDL
Line Types only)
❑ Frame Relay
or
PPP over Frame Relay Enabled:
❑ Off (default) or
❑ On
DLCI:
_______________________
LMI:
❑ ANSI (Annex D)
❑ CCITT (Annex A)
❑ LMI
❑ None
(for ISDL Line Type only)
❑ HDLC
Data Circuit VPI
Data Circuit VPI
0-255 (0 is default)
0-65535 (38 is default)
_______________________
_______________________
Easy Setup Profile Screen
Address Translation
Enabled:
❑ Yes (default) or
❑ No
IP Addressing: ❑ Numbered (default) or
❑ Unnumbered
(for Numbered IP Addressing)
Local WAN IP Address:
_______________________
Local WAN IP Mask:
_______________________
(for Unnumbered IP Addressing)
Remote IP Address:
_______________________
Remote IP Mask:
_______________________
(for PPP DLEs only)
PPP Authentication:
❑ None (default),
❑ PAP or
❑ CHAP
(for PAP or CHAP)
User Name (or Host Name):
_______________________
(for PAP or CHAP)
Password (or Secret):
_______________________