Filter
Top Products
11
5.3. Connecting the remote control
To connect the remote switch (Fig.2):
- unscrew the cap of the remote connector (4, Fig.1) and
store it in a safe place,
- plug in the remote connector contact (3, Fig.2) observing
the key visible on the cable side,
- tighten the union nut,
- attach the remote switch to the weapon pivot or grip with
velcro tape (2, Fig.2).
5.4. Adjusting LAM on a weapon
Prior to adjusting LAM which has never been in operation,
perform 10 shots in order to stabilize LAM adjustment
mechanisms under the influence of shock.
LAM adjustment should be performed after checking the
weapon fire capability (with an iron sight) or bringing it to
normal fire under the same conditions in the following order:
- zeroing in distance is selected in accordance with fire
instructions for a given type of weapon;
- mount LAM on the weapon;
- fix the weapon in the aiming rest and aim it with the help
of an iron sight, that is set out in the same way as when
checking the weapon fire capability, and at the same
point;