Filter
Top Products
5
LAM consists of an emitter (6,7, Fig.1), a battery
compartment (15,16, Fig.1), windage (9, Fig.1) and elevation
(12, Fig.1) adjustment mechanisms, an operating modes
switch (17, Fig.1), a remote switch (Fig.2), a clamp (1, Fig.1).
A battery is to be inserted into the battery compartment
(16, Fig.1). Battery compartment cap (15, Fig.1) is attached
to the body with a rubber band. The battery compartment is
sealed with rubber O-ring. A spare O-Ring is included in the
delivery set.
Emitter tube output window is closed with a cap (7, Fig.1)
with an output aperture. When not in operation, the aperture
is closed with a protective rubber cap (8, Fig.1).
LAM is activated by means of the operating modes switch
(17, Fig.1) and/or the remote switch (Fig.2). At switching
laser radiation on ‘laser on’ warning indicator 11 lights.
The switch (17, Fig.1) has the following positions:
Mode
OFF Off
C The aimer is on; Continuous live fire
R The aimer is on; Remote activation; live fire