Filter
Top Products
15
To apply new layer of lubricant:
- Within two hours from cleaning apply an even
0.2-0.5 mm thick layer of lubricant on metal surfaces
with a brush.
- Do not cover plastic parts.
When preparing for a long-term storage LAM just received
from manufacturer or from workshop, ensure that actual set is
the same as indicated in the Delivery Set section of this
manual.
Cases with LAMs should be placed on stands, shelves or in
cupboards at dry heated and ventilated premises in
accordance with Storage conditions as described in
Specifications.
It is unacceptable to keep LAMs on the floor, near stoves or
windows that let through direct sunrays.
Presence of acid and alkaline vapor, as well as of other
aggressive admixtures in the air in the storage area may cause
damage to LAM.
After 4 years of storage, it is necessary to perform thorough
inspection of LAMs’ functionality.
6.3. Transportation
To prepare LAM for transportation:
- Turn LAM off by turning operating modes switch.