Filter
Top Products
Chapter 3: Device Configuration
July 2007
3-8
16
Configure the 802.11 a Membership VLAN by entering 0-4095 into the 802.11 a Membership VLAN
entry field.
IMPORTANT NOTE: The minimum requirement for this field is 4095, which is the initial designated
Management VLAN.
IMPORTANT NOTE: If the NEW Device is to be a 2.4/4.9 Mesh, the 802.11 a Membership VLAN
entry field will become disabled. This is will eliminate the possibility of creating a network loop and
VLAN overlap. Use the VLAN Configuration Tool after the device(s) have been added from
MeshManager’s Tools | VLAN Configuration menu.
Figure 3-10 Entering 802.11 a Membership VLAN Data