Filter
Top Products
16
Basic Steps for Shooting and Playback
Preparation 2 Charge the Battery
1 Prepare the included Charging AC Adapter EH-70P.
• If a plug adapter* is included with your camera, attach the plug adapter
to the plug on the Charging AC Adapter. Push the plug adapter firmly
until it is securely held in place. Once the two are connected, attempting
to forcibly remove the plug adapter could damage the product.
* The shape of the plug adapter varies depending on the country or
region in which the camera was purchased.
The Charging AC Adapter comes with the plug adapter attached in
Argentina and Korea.
2 Make sure the battery is installed in the camera, and then connect the
camera to the Charging AC Adapter in order of
1
to
3
.
• Keep the camera turned off.
• Be sure that plugs are properly oriented. Do not attempt to insert plugs at an angle, and do
not use force when connecting or disconnecting the plugs.
• The charge lamp slowly flashes green to indicate that the battery is charging.
• About 2 hours and 40 minutes are required to charge a fully exhausted battery.
• When the battery is fully charged, the charge lamp turns off.
• See “Understanding the Charge Lamp” (A17) for more information.
USB cable
(included)
Electrical
outlet
Charge lamp