Filter
Top Products
81
Using the FH-835S Holder for 35-mm Film Strips
The FH-835S is used when scanning strips of 35-mm film up to six frames in length. Up to two
film strips can be placed in the holder at a time. When scanning a single film strip, or when
scanning two strips of different lengths, use the masking sheet to mask the unused apertures
in the holder ( 84).
With the holder oriented so that the insertion guide is to the left, insert your fingers into the
holes in the lower portion holder to unlatch the hooks holding the upper cover in place, then
open the holder.
Upper cover
Hooks (× 2)
Masking sheets
Insertion guide