Filter
Top Products
4
Step 1—Connect the WT-2
1
Turn the camera off.
4
Open the camera USB connector cover and con-
nect the USB cable to the USB connector.
LO
C
K
POW
ER
POW
ER
5
Pass the cable over the guide on the BL-2 battery-
chamber cover.
LO
CK
POW
ER
POW
ER
3
Place the camera on the WT-2 and rotate the knob
in the direction shown to fasten the WT-2 to the
camera tripod mount.
LO
C
K
POW
ER
L
IN
K
B
U
S
Y
POW
ER
L
IN
K
B
U
S
Y
2
Remove the cover protecting the camera power
contact. The cover can be stored in the housing
on the WT-2.
Disconnecting the WT-2
To disconnect the WT-2:
1 Turn the camera off.
2 Disconnect the USB cable.
3 Rotate the knob clockwise to unscrew the WT-2 from the camera tripod mount.
4 Replace the cover on the camera power contact.
Setup