Nikon WT-2 Network Card User Manual


 
17
Pairing
Once wireless network settings have been adjusted, the camera and com-
puter must be “paired” before they can communicate in PTP / IP mode for the
rst time. “Pairing” allows the computer to control the camera by establish-
ing permissions between the two devices.
1
Turn the camera on.
2
Select PTP / IP for the Wireless LAN > Mode op-
tion in the camera setup menu ( 24).
3
Select On for Wireless LAN > Wireless LAN sys-
tem ( 24).
4
Confi rm that “Now in PTP / IP mode / Waiting for
connection” is displayed in the top level of the
wireless LAN menu. For information on what to
do if an error is displayed, see “Troubleshooting”
( 50).
5
Press the camera button. The message shown
at right will be displayed, with the camera name
in blue ( 36).
Pairing
The camera connection list ( 36) can store the names of up to ten computers (note
that attempting to control the camera simultaneously from multiple computers may
produce unexpected results; 21). When the connection list is full, computers can be
deleted from the list to make room for additional pairings.