Filter
Top Products
INSTALLATION OVERVIEW
INSTALLATION OVERVIEW
The following is an overview for installing your iPOWER
™
product.
• Unpack all of the contents of the AC-8CX carton.
• Plan your system and lay out all of the equipment that will be connected to the AC-8CX.
• Place the AC-8CXin the location where it will be used, being sure to follow both the safety pre-
cautions listed in the front of this manual and the placement recommendations on (page 12).
DO NO
T plug the unit in yet.
• Plug each of the components into the AC-8CX. You may want to make a note on paper
listing the component connected to each outlet.
• Connect any device with coaxial outputs to the F-connectors.
• With all of the attached components in the OFF position, plug the AC-8CX into the wall.
• Test for proper operation.
9