IMPORTANT SAFETY PRECAUTIONS
Your iPOWER
™
product represents the latest in power management and protection technology.
However, like any electronic device, an inappropriately or improperly installed device may not per-
form as intended. By following a few common sense precautions, your iPOWER
™
product will give
you a lifetime of worry-free performance.
The following safety precautions apply to all iPOWER
™
products.
READ AND OBSERVE THE FOLLOWING SAFETY PRECAUTIONS AT ALL TIMES.
WARNING! Power Source:
Use only with a 3-prong standard AC outlet or a GROUNDED 2 to
3 prong adapter. iPOWER
™
products cannot provide power protection without a grounded AC
source. Never use a 3 to 1 adapter plug— this will disable all protection from your iPOWER
™
unit and will void the Limited Lifetime Warranty and Connected Equipment Guarantee.
All rooftop devices connected to your iPOWER
™
products should be grounded according to
the National Electrical Code (NEC). Do not place any rooftop device where it can come into
contact with power lines or any power circuit.
WARNING! Operating Voltage: Any equipment plugged into an iPOWER
™
product must have
a 120V, 60Hz rating.
WARNING! Power Rating: Check the power consumption (watts) of each device that will be
powered by an iPOWER
™
product. Be sure that the total of all devices being connected does
not exceed 1800 watts.
WARNING! Water and Moisture: Do not use any iPOWER
™
product in an area where it may get
wet, such as near a bathtub, sink, laundry facility, in a wet basement, or near a swimming pool.
WARNING! Ventilation: While iPOWER
™
products do not generate a significant amount of heat,
they should not be placed directly on a bed, rug, or sofa that may obstruct the unit’s natural heat
dissipation abilities.