Filter
Top Products
E
N
G
L
I
S
H
Nokia 930C 5
Using the Monitor
Setting the Timing Mode
Setting the timing mode is important for maximizing the quality of the
screen image and minimizing eye strain. The
timing mode
consists of the
resolution
(example 1280 x 1024) and
refresh rate
(or vertical frequency;
example 75 Hz). After setting the timing mode, use the on-screen controls
to adjust the screen image.
The recommended timing modes for this monitor are:
VESA 1280 x 1024@85 Hz.
To set the Timing Mode:
1
Set the resolution: Right-click on the Windows
®
desktop >
Properties
>
Settings
> Desktop Area (Screen Area for Windows 95 and newer) > set the
resolution.
2
Set the refresh rate: See your graphic card's user guide for instructions.
NOTE:
To minimize the adjustments required for an optimal screen
image
,
selectatimingmodefromthe
Preset Timing Modes
table below.
WARNING:
Do NOT set the graphics card in your computer to exceed the
maximum refresh rate; doing so may result in permanent damage to your
monitor.
(NI = Non Interlaced)
Preset Timing Modes
VGA 640 x 400 @ 70 Hz
VESA 800 x 600 @ 75 Hz
VESA 800 x 600 @ 85 Hz
VESA 1024 x 768 @ 75 Hz
VESA 1024 x 768 @ 85 Hz
VESA 1280 x 1024 @ 75 Hz
VESA 1280 x 1024 @ 85 Hz
VESA 1600 x 1200 @ 75 Hz
VESA 1600 x 1200 @ 85 Hz
VESA 1920 x 1440 @ 75 Hz
Macintosh 1024 x 768 @ 75 Hz
Macintosh 1152 x 870 @ 75 Hz
Timing Modes with Maximum Refresh Rates
1920 x 1440 NI @ 77 Hz
1856 x 1392 NI @ 80 Hz
1792 x 1344 NI @ 83 Hz
1600 x 1200 NI @ 92 Hz
1280 x 1024 NI @ 107 Hz
1152 x 864 NI @ 125 Hz
1024 x 768 NI @ 140 Hz
800 x 600 NI @ 175 Hz
640 x 480 NI @ 180 Hz