Filter
Top Products
YML14WN ADSL2+ Wireless N150 Modem Router User Guide
www.netcomm.com.au 37
NetComm Gateway Series - ADSL2+ Wireless N150 Modem Router
DDNS
Go to Access Management -> DDNS to setup your DDNS parameters. Dynamic DNS allows you to update your dynamic IP address with
one or many dynamic DNS services. So anyone can access your FTP or Web service on your computer using DNS-like address.
CWMP
The CWMP page is used to congure the TR-069 CPE. Here you may change the settings for the ACS’s parameters.
WAN Management Protocol (TR-069) allows an Auto-Conguration Server (ACS) to perform auto-conguration, provision, collection, and
diagnostics to this router.
CWMP: Activated/Deactivated TR-069 client on the CPE.
Login ACS
URL: URL for the CPE to connect to the ACS using the CPE WAN Management Protocol. This parameter MUST be in the form of a
valid HTTP or HTTPS URL. An HTTPS URL indicates that the ACS supports SSL. The “host” portion of this URL is used by the CPE for
validating the certicate from the ACS when using certicate-based authentication.
User Name: Username used to authenticate the CPE when making a connection to the ACS using the CPE WAN Management Protocol.
This username is used only for HTTP-based authentication of the CPE.
Password: Password used to authenticate the CPE when making a connection to the ACS using the CPE WAN Management Protocol.
This password is used only for HTTP-based authentication of the CPE.
Connection Request
Path: The path of the device ConnectionRequestURL. The device ConnectionRequestURL should be congured based on the Device_IP,
Path and Port as follows:
http://Device_IP:Port/Path
Port: The port of the device ConnectionRequestURL
User Name: Username used to authenticate an ACS making a Connection Request to the CPE.
Password: Password used to authenticate an ACS making a Connection Request to the CPE.