Filter
Top Products
ADSL2+ Wireless N150 Modem Router User Guide YML14WN
6 www.netcomm.com.au
LED Color On Flash Off
Green Ready Waiting for device ready Power Off
Green Connect to DSLAM Disconnect to DSLAM N/A
Green The device has a WAN IP address from ISP Transmit / Receive Data N/A
Green WLAN Ready Transmit / Receive Data WLAN Off
Green N/A Start WPS peer within 2 minutes WPS Idle
Green Ethernet Connected Transmit / Receive Data Ethernet Disconnected
Back Panel Connectors
The below table shows the function of each connector and switch of the NB14WN’s back panel. The image illustrates the connectors.
Connector Description
POWER Connects to your NB14WN’s 12VAC power adaptor
ON/OFF Power Switch
LAN1~4 RJ-45 Jack (Ethernet Cable) connection to your PC or switch
LINE Connects to your ADSL2+ line – for ADSL2+ Line input
RESET Reset button, RESET the NB14WN to its default settings
Side Panel
Connector Description
WPS Start WPS(Wi-Fi Protected Setup) peer within 2 minutes.
WLAN WLAN On/Off switch