Filter
Top Products
Installing the ARN
114200-E Rev 00
1-13
Connecting to the Fiber Interface
To connect a fiber cable to the base module or expansion module Ethernet
interface, insert the fiber cable jack into the interface as shown in Figure 1-8
.
Figure 1-8. Connecting an Ethernet 100BASE-Fx Cable
Connecting to a Token Ring Interface
You can connect a token ring cable to any ARN base module or expansion module
that contains a token ring interface option. Each of these interface options offers
two token ring interface types: an STP interface or a UTP interface.
Note:
You can use only one token ring interface on an ARN base or expansion
module at any time. For example, you can connect to either the STP interface
or the UTP interface on a base module, but you cannot use both interfaces at
the same time.
ARN0062C
COM3 COM4 COM5
COM
U
D
DD
B1
B2
RLSD
Run
Boot
Diag
Pwr
RPS
Fan
Base
Adapter1
Adapter2
Expansion
DCM
PCMCIA
Advanced Remote Node
RLSD3
RLSD4
RLSD5
1
2
Serial
Serial
ISDN BRI
withNT1
Tx
Rx
Cl
Tx
Rx
Link
100
100 BaseFX
Ethernet 1
10BaseT
AUI
Ethernet 2
Expansion module 10BASE-T interface
Base module 100BASE-FX interface
To
Ethernet
network
Ethernet 100BASE-FX cables