Filter
Top Products
SNMP for ERS 8600 TCG v2.1 NN48500-564
Nortel Confidential Information Copyright © 2008 Nortel Networks. All Rights Reserved.
External Distribution
31
7.2 Configuration Example: Changing the Default
SNMP Community Name with Release 3.7 or 4.1
By default, the ERS 8600 public and private communities are configured using the names first
and second respectively. You can view the SNMP community table by using the following
command. Notice the community names, public and private by default, are asterisk out.
• ERS-8606:5# config snmp-v3 community info
========================================================================
Community Table
========================================================================
Index Name Security Name Transport Tag
------------------------------------------------------------------------
first ******** readview
second ******** initialview
3 out of 3 Total entries displayed
------------------------------------------------------------------------
To change the default public/private SNMPv1, SNMPv2, and SNMPv3 community name, enter
the following command:
• To change the default public community name, in this example to ro567pp8600, enter the
following command:
o ERS-8606:5# config snmp-v3 community commname first new-commname
ro567pp8600
• To change the default private community name, in this example to rwa123pp8600, enter
the following command:
o ERS-8606:5# config snmp-v3 community commname second new-commname
rwa123pp8600
7.3 Configuration Example: Adding a New SNMP
Community to an Existing SNMP Group Member
If you use an existing group member in the VCAM table, a new community can be simply added.
To view the SNMP VACM and MIB view, the following commands can be used
• To view the VACM Membership configuration, enter the following command:
o ERS-8610-C:5# config snmp-v3 group-member info
• To view the VCAM Group Access configuration, enter the following command:
o ERS-8610-C:5# config snmp-v3 group-access info
• To view the SNMP MIB View, enter the following command:
o ERS-8610-C:5# config snmp-v3 mib-view info
For example, if you wish to add a new community named pp8600579 with read/write access,
enter the following command:
• ERS-8610-C:5# config snmp-v3 community create third pp8600579 initialview
After the community has been added, you can view the SNMP community table by using the
following command: