Filter
Top Products
Digital Telephone IP Adapter Installation and Administration Guide 101
January 2005 Configuring the IP Adapter unit using the telephone menu
13 The telephone display asks if you want to modify RLC Parameters, similar
to the following:
Modify RLC Parameters?
[1-Yes 2-No]
enable prioritizing
of voice packets in
the IEEE Media
Access Control
layer (802.1Q),
(continued)
7 Enter the DiffServ CodePoint value.
Valid entries are 0 (CS7), 1 (CS6), 2 (EF), 3 (AF41),
4 (AF31), 5 (AF21), 6 (AF11), and 7 (DE). The
default is 7 (EF). Refer to “DiffServ CodePoint:
Value” on page -127 for details on the definitions
for these entries.
8Press the Hold key.
9 Proceed to step 13.
not enable
prioritizing of
voice packets in
the IEEE Media
Access Control
layer,
1Press 2.
2Press the Hold key.
IF you want to THEN do the following:
retain the current
RLC settings,
1Press 2.
2Press the Hold key.
3 Proceed to step 18 on page 107.
IF you want to THEN do the following: