Filter
Top Products
102 Digital Telephone IP Adapter Installation and Administration Guide
Configuring the IP Adapter unit using the telephone menu Standard 2.1
modify the current
RLC settings,
1Press 1.
2Press the Hold key.
Result: The telephone display prompts you to enter
the RLC port number that you want to process this
Digital Telephone IP Adapter unit’s traffic. The
telephone display also shows the RLC port number
currently configured to handle this traffic, similar to
the following:
Enter Port # of RLC
7
3 Press the digit(s) of the new port number.
4Press the Hold key.
Result: The telephone display prompts you to enter
the security level that you want to assign to this
Digital Telephone IP Adapter unit. The telephone
display also shows the current security level, similar
to the following:
Enter Security Level
1
allow unrestricted
access to the
Digital Telephone
IP Adapter
unit
and the RLC,
1Press 1 to select No security.
2Press the Hold key.
3 Proceed to “Enable IP? [1-Yes 2-No]” on page 103.
IF you want to THEN do the following: