Filter
Top Products
44 Install Nortel Linux base
Figure 23
Configuration validation 1 window
14 In the Network Time Protocol (NTP) Configuration screen, type Y
or N to choose the NTP transfer mode for the system. Type 1, 2,
or 3 and then press Enter to indicate the clock source function of
the Linux system, as shown in Figure 24 "Network time protocol
configuration window" (page 45).
Note: NTP uses Message Digest Algorithm 5 (MD5)
signatures to authenticate the exchange of timestamps when
operating in secure mode.
Nortel Communication Server 1000
Linux Platform Base and Applications Installation and Commissioning
NN43001-315 02.09
29 October 2008
Copyright © 2007–2008 Nortel Networks
.