Filter
Top Products
78 Installation and configuration of applications on Linux base
Solid server configuration window by selecting No. Press Enter
to continue.
9 The Primary Security Service server TLAN IP address screen
appears as shown in Figure 66 "Primary Security Service server
TLAN IP address window" (page 78). Enter the IP address of the
TLAN network interface Primary Security Service server. Type
yes to confirm the TLAN IP address is correct.
Figure 66
Primary Security Service server TLAN IP address window
10 The Primary Security Service server Fully Qualified Domain
Name (FQDN) appears as shown in Figure 67 "Primary Security
Service server Fully Qualified Domain name window" (page 78).
Enter the Fully Qualified Domain name of the Primary Security
Service server. Type Yes to confirm the FQDN is correct. For
a definition of FQDN see "FQDN requirements, page 30" (page
36) .
Figure 67
Primary Security Service server Fully Qualified Domain name window
Note:
• The Primary Security Service must be up and running
at this point.
• You need to know the password for the nortel
account on the Primary Security Service server.
Installation fails if you do not know this password.
11 The Primary Security Service fingerprint screen appears as
shown in Figure 68 "Primary Security Service fingerprint window"
(page 79). Type Yes to verify the Primary Security Service
fingerprint.
Nortel Communication Server 1000
Linux Platform Base and Applications Installation and Commissioning
NN43001-315 02.09
29 October 2008
Copyright © 2007–2008 Nortel Networks
.