Filter
Top Products
Verifying that each CallPilot channel is functioning correctly 57
3
Type the test mailbox number for the telephone you are on, followed
by the # key.
4
Type the password for the mailbox, followed by the # key.
The default password is 12 + mailbox number. For example, if the
mailbox number is 4500 the password is 124500.
5
When prompted, type a new password, followed by the # key.
Re-enter the new password followed by the # key to confirm the
changed password.
—End—
Verifying that you can leave a message
Perform the following procedure to check that you can leave a message.
Step Action
1
On a test telephone, dial the DN of that telephone.
You are automatically forwarded to CallPilot voice messaging.
2
After the tone, leave a test message.
—End—
Verifying that you can retrieve a message
Perform the following procedure to check that you can retrieve a message.
Step Action
1
On a test telephone, dial the CallPilot voice messaging CDN.
2
Log on to the mailbox where the message was left in the procedure
"Verifying that you can leave a message" (page 57).
3
Press 2 on the telephone to play the message.
—End—
Verifying that each CallPilot channel is functioning correctly
Perform the following procedure to check that CallPilot channels are
functioning correctly.
Nortel CallPilot
Quickstart Guide
NN44200-313 01.02 Standard
5.0 19 May 2008
Copyright © 2007-2008, Nortel Networks
.