Filter
Top Products
63
Appendix
Configuring phantom DNs
This appendix describes how to configure phantom DNs.
There are two reasons to configure phantom DNs on the switch:
•
to create a dialable number for CallPilot services such as Application
Builder configurations and voice forms
•
to create virtual fax DNs for users who want a separate fax number
Checking for existing phantom loops
Step Action
A phantom loop must exist before you begin to configure phantom DNs. Use
this procedure to identify a phantom loop.
1
Connect to the PBX.
2
Enter LD 97.
3
At the REQ prompt, enter PRT.
4
At the TYPE prompt, enter SUPL.
5
Use the capture text function in hyperterminal to save a text file of
the output.
6
Review the output for a superloop tagged PHANTOM. If a phantom
loop does not exist, perform the procedure below to create one.
—End—
Configuring a phantom superloop
Step Action
1
Connect to the PBX.
Nortel CallPilot
Quickstart Guide
NN44200-313 01.02 Standard
5.0 19 May 2008
Copyright © 2007-2008, Nortel Networks
.