Filter
Top Products
10
119500-A Rev. A
Nautica 4000 Installation Guide
Installing the PC Applications
After you connect the cables and turn on the Nautica 4000, load
the Nautica 4000 configuration software onto your PC as follows:
1. Insert the CD that came with the Nautica 4000 package
into your CD-ROM drive.
2. If auto-start is enabled on your PC, the setup program
starts automatically.
3. If the setup program does not start automatically, start
Windows Explorer, change to the CD-ROM drive, then
double-click on the program file labelled setup.exe.
4. First time users should place the icons for Nautica
Wizard, Nautica Manager and Nautica Watch on the
desktop for easy access in the future.
5. The software is loaded onto your PC and the Installation
Assistant starts, allowing you to configure the Nautica
4000 using a Windows interface.
6. If the Installation Assistant does not start automatically,
double-click on the Nautica Wizard icon. When Nautica
Wizard starts, click on the Nautica 4000 icon in the
Wizard window, then click on the Configure button at the
bottom of the Wizard window.
For more information about the software included on the CD,
refer to the online Help and the online documentation.
Note:
You need Adobe Acrobat 3.0 in order to read the online
documentation. You can install Adobe Acrobat from the CD.