Filter
Top Products
28 Chapter 1 Hardware overview
NN46110-313 02.01
Figure 6 Front panel of the VPN Router 1010
Table 3 describes the LEDs on the VPN Router 1010/1050/1100 front panel.
For complete information about the health check, see Nortel VPN Router
Troubleshooting (NN46110-602).
Ethernet port LEDs
To confirm that you cabled the Ethernet LAN interface properly, examine the port
LEDs on the front of the gateway. (Figure 6 on page 28 shows the LAN 0 and
LAN 1 port LEDs on the front of the VPN Router 1010.)
Table 3 Front panel LED indicators
LED Indicator Description
Boot/Ready Yellow The gateway is booting and is in a non-ready state.
Green The boot process is complete and the gateway is in a
state of readiness.
Alert Yellow (on) An alarm condition exists. The alarm may indicate a
serious condition, such as a hardware defect, or a
software attention condition. The alarm condition is
described in the health check display.
Off No alarm condition exists.
10675EA
VPN Router 1010
LAN 0 LAN 1 Console
Boot/Ready LED
10/100 Mb/s LEDs
Alert LED
Link/Activity LEDs