Filter
Top Products
Nortel Networks 5399 and 8000 Access Switch SNMP MIB Reference
3-8 300861-C Rev. 00
Table3-7. PrivateMIBFilenames
Most of the configuration parameters are provided as objects with read-write
access permission in the private enterprise MIB. A number of these parameters
are in the standard MIBs that the SNMP agent supports.
Most MIB object names for the parameters in the private enterprise MIB are
preceded by the string: “.iso.org.dod.internet.private.enterprises.xylogics.annex.”
MIB Prefixes
All MIB object names have prefixes that are used to organize them into groups.
Table 3-8 lists these prefixes and the corresponding MIB files that contain the
MIB objects with these prefixes.
MIB Filename Description
xylo.smi Describes the structure of the Remote Access
Concentrator MIBs.
xylo.trp Contains the trap definitions for all the private
traps.
xylo-anx.mib Contains MIB objects related to configuring the
Model 8000 RAC and Model 5399 RAC (for
example, RAC-wide configuration settings).
xylo-callmgmt.mib Contains the private MIB active call and call
history objects.
xylo-modem.mib Contains all the private MIB objects for modem
status and configuration.
xylo-protocol.mib Contains the protocol-related private MIB groups.
xylo-trpobj.mib Contains the trap host table object and all trap
threshold objects.
xylo-wan.mib Contains the MIB objects related to WANs (either
PRI or T1).
Note: There are other settable MIB objects included in the standard MIBs
supported by the SNMP agent. The read-only objects defined in the various
MIBs allow the SNMP management station to monitor many MIB variables.