Filter
Top Products
Nortel Networks 5399 and 8000 Access Switch SNMP MIB Reference
5-2 300861-C Rev. 00
Table 5-1. Current Error Counter MIBs
MIB Object Name Description
anxt1CurrentIndex The index value of the DS1 interface for the current interval.
anxt1CurrentOofs The number of OOF (Out Of Frame) events for the current
interval. (An event begins when any two out of four
consecutive frame synchronizing bits are received from the
network interface are incorrect.) An OOF state ends when
reframe occurs.
anxt1CurrentBpvs The number of bipolar violation errors for the current interval.
(Bipolar violation is the occurrence of two consecutive pulses
with the same polarity.)
anxt1CurrentCrcs The number of CRC errors for the current interval. (DS1 signal
from incoming call does not agree with DS1 signal from the
network.)
anxt1CurrentCs The number of DS1 frames which are replicated or deleted in
the current interval.
anxt1CurrentRnacs The number of network alarms occurring in the current
interval. (This is expressed in seconds with at least one alarm
occurring per second.)
anxt1CurrentEsfError The extended superframe errors count in the current interval.
anxt1CurrentLofc The loss of framing errors count in the current interval.
dsx1CurrentUASs The number of unavailable seconds encountered by a DS1
interface in the current 15 minute interval.
dsx1CurrentPCVs The number of path encoding violations encountered by a
DS1 interface in the current 15 minute interval.
dsx1CurrentBESs The number of bursty errored seconds encountered by a DS1
interface in the current 15 minute interval.
dsx1CurrentCSSs The number of controlled slip seconds encountered by a DS1
interface in the current 15 minute interval.
dsx1CurrentESs The number of errored seconds encountered by a DS1
interface in the current 15 minute interval.
dsx1CurrentSEFs The number of severely errored framing seconds encountered
by a DS1 interface in the current 15 minute interval.