Filter
Top Products
6/28/2007 page 113 of 145
Get State Of Priority
Command Name
port get stateofpriority
Description Displays the priority state of a given port number.
Syntax port get stateofpriority <port-no>
Parameters
port-no
port number (1 ~ 14)
Examples
N-TRON/Admin#[1]> port get stateofpriority 6
Priority State of Port[6] is : [disabled]
NOTES Check whether port-no is in the valid range. (1 ~ 14)
Get Intruder State
Command Name
port get intruderstate
Description Displays whether the intruder log is enabled or disabled.
Syntax
port get intruderstate
Parameters None
Examples
N-TRON/Admin#[1]> port get intruderstate
Intruder Log : Disabled
NOTES
Get Priority Level
Command Name
port get prioritylevel
Description Displays the priority level on a given port.
Syntax port get prioritylevel <port-no>
Parameters
port-no
port number (1 ~ 14)
Examples
N-TRON/Admin#[1]> port get prioritylevel 6
Priority Level of Port[6] is : [1]
NOTES Check whether port-no is in the valid range. (1 ~ 14)
Get STP Status
Command Name
port get STP Status
Description Displays the Spanning Tree Protocol Status on a given port.
Syntax port get stpstatus <port-no>
Parameters
port-no
port number (1 ~ 14)
Examples
N-TRON/Admin#[1]> port get stpstatus 6
Stp state of [6] port is : [Forward]
NOTES STP states include: Listening, Learning, Blocking, & Forwarding
Get Back Pressure
Command Name
port get backpressure
Description Displays the backpressure information on a given port number (enabled or
disabled).
Syntax port get backpressure <port-no>
Parameters
port-no
port number (1 ~ 14)
Examples
N-TRON/Admin#[1]> port get backpressure 6
Back Pressure is DISABLED
NOTES Check whether port-no is in the valid range. (1 ~ 14)
Get PVID
Command Name
port get pvid
Description Displays a given port’s VLAN-ID.
Syntax port get pvid <port-no>
Parameters
port-no
port number (1 ~ 14)
Examples
N-TRON/Admin#[1]> port get pvid 6
PVID of port 6 is 4.
NOTES Check whether port-no is in the valid range. (1 ~ 14)