Filter
Top Products
33
Normally, the software automatically detects the signal type that is being
used. If necessary, you can force the software to detect the signal type as
follows:
Click Detect to force detection of the signal type.
The software tests each signal type and stops when it detects a match.
If the signal type cannot be detected, click the Video Mode list box
arrow and then click the item corresponding to the signal source.
Click Composite, Auto if you want the frame lock board to classify
the signal as bi-level or tri-level.
Understanding the Status Indicators
The G-Sync Devices section displays the status of the sync signals as
well as the status of the RJ45 ports. The two ports are represented by
connector icons.
.
NVIDIA Quadro G-Sync II Port
s
1.
2.
3.
4.
NVIDIA Frame Synchronization Under Linux