Filter
Top Products
39
See Using the OpenGL Extensions (page 55) for instructions on how an
application can use the extensions to accomplish swap sync.
Setting Up Genlock +
Frame Lock
The procedures in the previous two sections describe the more common
uses of the Quadro G-Sync II option card. A third use involves a
combination of genlock and frame lock.
In this setup, a set of client systems are connected to a system that is
designated as the server, as described in How To Set Up Frame Lock. The
difference is that the server system is genlocked to an external house sync,
as described in How To Set Up Genlock.
Sync Source
Server
Client
Client
Clien
t
Out
Out
In
Out
In In
Follow the instructions under How To Set Up Frame Lock and then
attach an external sync source to one of the systems included in the
frame lock group.
Check the Server check box of the display that is connected to that
same system.
Check the Use House Sync if Present check box.
Enable synchronization by clicking Enable Frame Lock.
As with other frame lock/genlock controls, you must select the signal
server while synchronization is disabled.
1.
2.
3.
4.
NVIDIA Frame Synchronization Under Linux