Filter
Top Products
27
Do a basic scan-to-file job
How to scan-to-file on the productive scanner
1. Place your original face-down, right aligned along the original guide. Keep the
legend at your right hand side.
2. Feed the original.
Note: When you feed the original, keep it in place until it is transported (about 1
cm) into the machine.
[19]
3. Select the appropriate scanner template.
Make sure the 'Output' mode is set to 'File' or 'Copy&file'.
4. Press the green start key.
Result
The scanner scans the original and the sends the scanned file to the default
scan-to-file destination.