Filter
Top Products
12
This setting allows updates to the firmware when YES is
enabled. Usually this option is not required except when a
firmware update is released and run from a client machine.
POP Interval
• Settings: Off/1min/5min/10min/30min/60min/Daily
• Default: OFF
POP Interval can be accessed using the following:
1. Press Select Function to enter the menu.
2. Press
9/USER PROG to enter the programming menu and
then press keypad
8 for I-FAX NIC OPTIONS.
3. Press to enter
I-FAX NIC OPTIONS.
4. Press until
POP INTERVAL appears.
5. Press to enter POP Interval.
6. Select either
YES or NO to select the interval time desired.
This determines the frequency the machine will check for
incoming transmissions from the POP mailbox. Select the
option desired. OFF sets the machine to not check for incom-
ing transmissions.
Daily
Daily sets the machine to check the mail server once a day.
Thus, it is required that the time of day is set for this option.
– When the DAILY setting is selected, the time of day when
the mailbox is polled requires setting. There are four
different time settings available.
– If the POP INTERVAL TIME is not registered, then the auto
POP receiving action will not occur.
– After POP INTERVAL TIME is registered, even if the
setting is changed from
DAILY to another one, the POP
INTERVAL TIME
setting will not be lost.
Network Settings
This function modifies these network settings. The I-Fax Net-
work settings can be accessed using the following:
1. Press
Select Function to enter the menu.
2. Press
9/USER PROG to enter the programming menu and
then press keypad
8 for I-FAX NIC OPTIONS.
SELECT
FUNCTION
USER
PROG.
9/HYPEN
TUV
8
8:I-FAX NIC OPTIONS
YES ( ) NO( /1-9)
YES
NO
YES
NO
YES
POP INTERVAL
[DAILY] YES ( ) NO( )
YES
POP INTERVALTIME
[TIME1] YES ( ) NO( )
YES
POP INTERVALTIME
[__:__] PRG. TIME 0-9
SELECT
FUNCTION
USER
PROG.
9/HYPEN
TUV
8
8:I-FAX NIC OPTIONS
YES ( ) NO( /1-9)
YES
NO