Filter
Top Products
BMG7011 and BMG7012 User’s Guide Rev. 1.9
© Copyright, 2004 Oki Network Technologies. All Rights Reserved 20
3.2 DHCP Server Configuration
3.2.1 DHCP Configuration
If the device mode is gateway mode, we support DHCP Server on LAN side to assign IP address, etc. to the PC(s)
connected to the LAN port. You can set the Status, Last IP and Mode etc. on this page. After you make the settings,
click OK for the settings to immediately take effect.
Figure 9 – DHCP Configuration Window
Item Description
Status The DHCP Server is enabled or disabled.
Last IP The last IP can be assigned by the DHCP server.
Mode The network settings assigned to the DHCP Client is Auto mode or Manual Mode. In Auto mode, the DNS
settings are from the WAN side. In Manual mode, the DNS settings are from the user’s input in this page.
DNS You can manually set the value in Manual mode or it takes the value from WAN side in Auto mode.
Domain You can manually set the value in Manual mode or it takes the value from WAN side in Auto mode.
Least time The least time of the DHCP client to holding the network settings. The value is useful in Auto mode.