Filter
Top Products
C6100 Series Network User’s Guide
Configuration - 50
Using SNMP
The printer and network card can be managed via a standard SNMP
management station. The network card supports SNMPv1, MIB-II
and OKI Data Private MIB.
The printer’s trap address can be set in five places using TCP/IP
and in one place with IPX.
The printer’s trap address can be set in five places using TCP/IP
and in one place with IPX.
Printer trap settings can be made with TELNET and a Web browser.
Configurable items and Default Values
Bold is the default setting.
Ref. No. Admin
Manager
Web browser TELNET/
Diagnostic
test print
Available
options
Notes
TCPIP-1 [OKI Device
Setup]-
[TCP/IP]-
[Use TCP/IP
Protocol]
[Network
Configuration]-[
General
Settings]-[Protoc
ol Options]-[TCP/
IP]
[Setup TCP/
IP]-
[TCP/IP
protocol]
ENABLE/
DISABLE
Set TCP/IP
protocol,
enabled/
disabled
TCPIP-2 [OKI Device
Setup]-
[TCP/IP]-
[IP Address]
[Network
Configuration]-[T
CP/IP]-[Fixed IP
Address
Settings]-[IP
Address]
[Setup TCP/
IP]-[IP addres
s]
0.0.0.0—
255.255.255.25
5 (0.0.0.0)
Set IP
address
TCPIP-3 [OKI Device
Setup]-
[TCP/
IP]-[Subnet
Mask]
[Network
Configuration]-[T
CP/IP]-[Fixed IP
Address
Settings]-[Subne
t Mask]
[Setup TCP/
IP]-[Subnet
mask]
0.0.0.0—
255.255.255.25
5 (0.0.0.0)
Set subnet
mask
TCPIP-4 [OKI Device
Setup]-
[TCP/
IP]-[Default
Gateway]
[Network
Configuration]-[T
CP/IP]-[Fixed IP
Address
Settings]-[Defaul
t Gateway]
[Setup TCP/
IP]-[Gateway
address]
0.0.0.0—
255.255.255.25
5 (0.0.0.0)
Set
gateway
(default
route).